返回产品中心 / 巴素兰山羊绒 · 色卡与工艺
BASOLAN26NM2CARD · 纱线系列
巴素兰山羊绒 · 色卡与工艺
巴素兰工艺整理的羊毛/山羊绒混纺，26NM/2 粗纺中支双股，绒面蓬松软糯、亲肤不扎、防缩易打理。含色卡总览、实拍色系与横机工艺说明，适合贴身毛衫、打底与轻奢针织款。
PDF本产品以 PDF 规格书形式提供，点击下载查看完整规格。
⬇ 下载规格书 PDF90%巴素兰10%山羊绒 · 70%巴素兰30%山羊绒
成 分 规 格 26NM/2 巴素兰绒感，软糯贴身 90% 巴素兰 · 10% 山羊绒 · 70% 巴素兰 · 30% 山羊绒 · 26NM/2 粗纺中支 · 共 200 余色 以巴素兰工艺整理的羊毛与山羊绒混纺，26NM/2 粗纺中支双股，绒面蓬松软糯、纱线饱满，贴身穿着柔和不扎、亲
色卡实拍
工艺 · 后处理
产品亮点
- 成分：90% 巴素兰 / 10% 山羊绒；70% 巴素兰 / 30% 山羊绒，绒面细腻、亲肤柔软。
- 规格：26NM/2 粗纺中支双股，绒面蓬松、纱线饱满、强力适中、织造损耗低。
- 手感：巴素兰工艺整理，绒面软糯顺滑，贴身穿着柔和不扎，回弹饱满。
- 功能：吸湿透气、轻盈保暖，防缩处理后不易起球、机洗友好、易打理。
- 色牢度：环保染色与严格固色，色泽鲜亮、批次稳定，色系齐备。
- 应用：软糯细腻毛衫、贴身打底、针织连衣裙及轻奢针织款。
推荐横机针型
- 主推 12 针（12G）：布面厚实、绒面饱满，最契合 26NM/2（2股26支）粗针定位；针织工艺惯例"2股26支适合12针横机"，为秋冬毛衫首选。
- 细腻/紧实 14 针（14G）：密度更紧实、布面平整，可做贴身打底与四季款（接近适用上限，建议先试织确认）。
- 粗针/厚款 9 针（9G）· 7 针（7G）双股进纱：织物蓬松、保暖性更好，适合粗针秋冬毛衫与花式组织。
- 提示：绒类纱蓬松柔软，织造张力宜适中偏小；26NM/2 偏粗，14G 以上布面偏稀、16G 不建议，建议先织小样确认密度与缩率。
成衣洗水整烫
- 1分检配缸：按款号、色号、缸差分检，同批同缸洗水，避免串色与色差。
- 2清水退浆去污：30℃以下温水 + 中性洗涤剂，轻柔去浮毛、油污与浆料；切忌高温与碱性。
- 3柔软/防缩整理：加入亲水性柔软剂，配合巴素兰防缩特性提升绒面手感，保持尺寸稳定。
- 4脱水定型：低速脱水，严禁拧绞，趁湿预整版型，防止起皱变形。
- 5烘干/阴干：低温烘干或平铺阴干至八成，避免高温暴晒导致绒面变硬、变色或缩水。
- 6生片整烫：缝合前对各衣片蒸汽整烫一次，消除卷边褶皱；蒸汽压力宜低。
- 7成衣整烫：缝制完成后整件上人台蒸汽烫定型一次，避免直接压烫绒面。
- 8复烫精整：领口、门襟、下摆、袖口等易皱部位尽量再多烫一次，确保平整度。
- 9质检包装：检验尺寸、色差、起球、污渍与整烫效果，合格后入袋，建议加防蛀处理。
成衣护理建议
- 洗涤：30℃以下温水，选择"羊毛/轻柔"程序；使用羊毛专用中性洗涤剂，避免含酶/含漂白成分。
- 熨烫：如需熨烫，使用低温蒸汽熨斗，垫布熨烫，避免直接接触绒面。
- 晾干：洗后轻压去水（切勿拧绞），平铺阴干，避免悬挂暴晒、高温烘干及长时间浸泡。
- 收纳：存放前保持干燥，可放置防蛀条，避免重物压迫导致变形。
产品特性
- ✓完整规格以 PDF 规格书为准，可下载查看
适用场景： 详见 PDF 规格书
Back to Products / Basolan Wool & Cashmere · Color Card & Craft
BASOLAN26NM2CARD · Yarn Programme
Basolan Wool & Cashmere · Color Card & Craft
Basolantreated wool/cashmere blend, 26NM/2 mediumcount woollenspun 2ply. Soft, fluffy, skinfriendly, machinewashable. Includes color overview, realshot swatches and flatknitting craft notes — ideal for base layers and fine knitwear.
PDFFull specification provided as a downloadable PDF spec sheet.
⬇ Download Spec Sheet90% Basolan 10% cashmere · 70% Basolan 30% cashmere
Composition & Specifications 26NM/2 Basolan woolen touch, soft and snug 90% Basolan · 10% cashmere · 70% Basolan · 30% cashmere · 26NM/2 worsted-count woolen medium count · 200+ colors in total Wool and cashmere blend finished with the Basolan process, 26NM/2 woolen medium-count two-ply, fluffy soft woolen surface, full-bodied yarn, soft and non-itchy against the skin, skin-friendly
Color Swatches
Craft & Finishing
Highlights
- Composition: 90% Basolan / 10% cashmere; 70% Basolan / 30% cashmere, fine woolen surface, skin-friendly and soft.
- Specifications: 26NM/2 woolen medium-count two-ply, fluffy woolen surface, full-bodied yarn, moderate strength, low knitting loss.
- Hand feel: Basolan process finishing, soft and smooth woolen surface, soft and non-itchy against the skin, full-bodied resilience.
- Functions: moisture-absorbing and breathable, light and warm, anti-shrink treatment for resistance to pilling, machine-wash friendly, easy care.
- Color fastness: eco-friendly dyeing and strict color fixing, bright colors, stable batches, complete color ranges.
- Applications: soft and fine sweaters, skin-friendly base layers, knitted dresses and light-luxury knitwear.
Recommended Flat-bed Gauge
- Main recommendation 12 gauge (12G): firm fabric surface, full woolen surface, best suited to the 26NM/2 (2-ply 26 count) coarse-gauge positioning; knitting process convention "2-ply 26 count suits 12G flat-bed knitting machine", the first choice for autumn/winter sweaters.
- Fine/tight 14 gauge (14G): denser, flat fabric surface, suitable for skin-friendly base layers and all-season styles (close to the applicable upper limit, trial knitting recommended first to confirm).
- Coarse gauge/thick styles 9 gauge (9G) · 7 gauge (7G) two-ply yarn feed: fluffy fabric, better warmth retention, suitable for coarse-gauge autumn/winter sweaters and fancy stitches.
- Tip: woolen-type yarns are fluffy and soft, knitting tension should be moderate to slightly low; 26NM/2 is on the coarse side, above 14G the fabric surface becomes sparse, 16G is not recommended, trial swatches recommended first to confirm density and shrinkage.
Washing & Finishing Steps
- 1Sorting and lot matching: sort by style number, color number and dye lot difference, wash same batch and same dye lot together, avoid color bleeding and color difference.
- 2Rinsing to remove sizing and stains: warm water below 30℃ + neutral detergent, gently remove loose fibers, oil stains and sizing; never use high temperature or alkaline agents.
- 3Softening/anti-shrink finishing: add hydrophilic softener, combined with Basolan anti-shrink properties to enhance the woolen hand feel, maintain dimensional stability.
- 4Dewatering and setting: low-speed dewatering, wringing strictly prohibited, pre-shape the panels while damp to prevent wrinkling and deformation.
- 5Drying/shade drying: low-temperature drying or lay flat to dry in the shade to 80%, avoid high temperature and direct sunlight causing the woolen surface to harden, discolor or shrink.
- 6Panel pressing: steam-press each garment panel once before sewing to eliminate curled edges and wrinkles; steam pressure should be low.
- 7Garment pressing: after sewing is completed, steam-press the whole garment once on a mannequin to set the shape, avoid pressing directly on the woolen surface.
- 8Re-pressing and finishing: for easily wrinkled areas such as neckline, placket, hem and cuffs, press once more if possible to ensure flatness.
- 9Quality inspection and packaging: inspect dimensions, color difference, pilling, stains and pressing results, bag after passing inspection, moth-proofing treatment recommended.
Care Instructions
- Washing: warm water below 30℃, select "wool/delicate" program; use wool-specific neutral detergent, avoid enzyme/bleach-containing ingredients.
- Ironing: if ironing is needed, use a low-temperature steam iron, iron with a pressing cloth, avoid direct contact with the woolen surface.
- Drying: after washing gently press out water (never wring), lay flat to dry in the shade, avoid hanging in direct sunlight, high-temperature tumble drying and prolonged soaking.
- Storage: keep dry before storing, moth repellent strips may be placed, avoid heavy objects pressing and causing deformation.
Key Features
- ✓Full specification available in the downloadable PDF spec sheet
Applications： See PDF spec sheet