返回产品中心 / 100% 丝光羊毛

M · 纱线系列
100% 丝光羊毛
经氯化—树脂丝光工艺去除羊毛鳞片,赋予纱线蚕丝般的柔和光泽与爽滑手感,同时显著降低毡缩与起球倾向。30NM/2 双股纺制,条干均匀、纱身饱满圆润,织片平整挺括、回弹性佳。46 色横跨白米驼、灰黑蓝、黄桔棕与紫玫瑰粉。
PDF本产品以 PDF 规格书形式提供,点击下载查看完整规格。
⬇ 下载规格书 PDF100%丝光毛
正乾 丝光毛 成分 规格 30NM/2 丝般光泽,羊毛温度
色卡实拍





工艺 · 后处理
产品亮点
- 成分:100% 丝光羊毛(精梳毛条经丝光处理),纯净单一成分,手感与光泽一致性更好。
- 工艺:氯化—树脂丝光去除羊毛鳞片,纤维表面光滑,赋予纱线蚕丝般的柔和光泽与爽滑手感。
- 规格:30NM/2 双股中高支,条干均匀、纱身饱满圆润、强力好,织片平整挺括、回弹性佳。
- 手感:丝光后亲肤不扎,贴身穿着无刺痒感;吸湿透气,冬暖夏凉,四季皆宜。
- 性能:鳞片去除后毡缩与起球倾向显著下降,尺寸稳定、不易缩水,可机洗更省心。
推荐横机针型
- 主推:12针(12G)—— 与 30NM/2 双股匹配最佳,布面平整致密、厚薄适中,做常规秋冬毛衫。
- 细腻/厚实:7针(7G)或 9针(9G)—— 双股并织,织物厚实饱满、廓形挺括,适合大衣与粗针织。
- 轻薄/细针:14针(14G)—— 单股或降低进纱,做细腻薄款毛衣、打底与配饰。
- 提示:丝光毛表面光滑、摩擦系数低,络筒与导纱部件需保持清洁光滑,防止纱线滑脱与磨毛;张力宜适中偏小,避免过牵伤纱。上机前先织小样确认密度、缩率与手感。
成衣洗水整烫
- 1分检配缸:按款号、色号、缸差分检,同批同缸洗水,避免丝光毛吸色差异造成的串色与色差。
- 2清水退浆去污:30℃左右温水 + 中性(弱酸性)洗涤剂,轻柔去浮毛、油污与织造浆料;切忌强碱与含氯漂白。
- 3防缩/柔软整理:丝光毛可不做缩绒,直接进入柔软整理;加入阳离子柔软剂或丝光后处理剂,强化丝般滑爽与光泽,并提升 抗毡缩稳定性。
- 4脱水定型:低速脱水,严禁拧绞与剧烈摩擦,趁湿预整版型,防止丝光毛因摩擦产生极光或变形。
- 5烘干/阴干:低温烘干或平铺阴干至八成;避免高温暴晒,防止羊毛泛黄、强力下降与光泽变暗。
- 6生片整烫:缝合前对各衣片蒸汽整烫一次,中温、垫布操作,消除褶皱并稳定尺寸。
- 7成衣整烫:缝制完成后整件上人台蒸汽烫定型一次;控制蒸汽与压烫时间,防止长时间压烫产生极光与压痕。
- 8复烫精整:领口、门襟、下摆、袖口等易皱部位再多烫一次,确保平整挺括、线条利落。
- 9质检包装:检验尺寸、色差、起球、勾丝、污渍与整烫效果,合格后入袋,注意防潮防虫存放。
成衣护理建议
- 洗涤:30℃以下温水,选择"羊毛/轻柔"程序或手洗;使用中性羊毛专用洗涤剂,禁止漂白与强碱。
- 晾干:洗后轻压去水(切勿拧绞、切勿甩干),平铺阴干,避免悬挂拉伸变形。
- 熨烫:中低温、垫布蒸汽熨烫,避免直接压烫;丝光毛宜少烫、轻烫以保持光泽。
- 收纳:折叠平放,保持干燥通风,放入防虫剂;避免长期悬挂与重物压迫。
产品特性
- ✓丝光工艺 · 剥鳞处理,蚕丝般柔和光泽
- ✓亲肤不扎 · 爽滑手感,显著降低毡缩与起球
- ✓30NM/2 双股 · 条干均匀、纱身饱满圆润
适用场景: 秋冬针织 · 毛衫 · 围巾 · 打底
Back to Products / 100% Mercerized Wool

M · Yarn Programme
100% Mercerized Wool
Chlorine-resin mercerizing removes the wool scales, giving a silk-like lustre and smooth hand while cutting felting and pilling. 30NM/2 2-ply for even, full, resilient fabrics. 46 colours across neutrals, greys, blues, yellows and rose pinks.
PDFFull specification provided as a downloadable PDF spec sheet.
⬇ Download Spec Sheet100% mercerized wool
Zhengqian mercerized wool composition specifications 30NM/2 silk-like luster, wool warmth
Color Swatches





Craft & Finishing
Highlights
- Composition: 100% mercerized wool (worsted top treated by mercerizing), pure single composition, better consistency in hand feel and luster.
- Process: chlorine-resin mercerizing removes wool scales, fiber surface is smooth, giving the yarn a silk-like soft luster and smooth hand feel.
- Specification: 30NM/2 two-ply medium-high count, even yarn, full and round yarn body, good strength, flat and crisp knitted panels, good resilience.
- Hand feel: after mercerizing, skin-friendly and non-scratchy, no prickling when worn next to skin; moisture-absorbing and breathable, warm in winter and cool in summer, suitable for all seasons.
- Performance: after scale removal, felting and pilling tendency significantly reduced, dimensional stability, not easy to shrink, machine washable and more worry-free.
Recommended Flat-bed Gauge
- Main recommendation: 12 gauge (12G) —— best match with 30NM/2 two-ply, flat and dense fabric surface, moderate thickness, for regular autumn/winter sweaters.
- Fine/thick: 7 gauge (7G) or 9 gauge (9G) —— two-ply knitted together, thick and full fabric, crisp silhouette, suitable for coats and chunky knits.
- Light/thin needle: 14 gauge (14G) —— single ply or reduced yarn feed, for fine thin sweaters, base layers and accessories.
- Tip: mercerized wool has a smooth surface and low friction coefficient, winding and yarn guide parts need to be kept clean and smooth to prevent yarn slipping and abrasion; tension should be moderate to low, avoid over-stretching and damaging the yarn. Knit a small sample before machine knitting to confirm density, shrinkage and hand feel.
Washing & Finishing Steps
- 1Sorting and lot matching: sort by style number, color number and dye lot, wash same batch and same dye lot together, avoid color bleeding and color difference caused by mercerized wool's dye absorption differences.
- 2Rinsing to remove sizing and dirt: warm water around 30℃ + neutral (weakly acidic) detergent, gently remove loose fibers, oil stains and weaving sizing; never use strong alkali or chlorine bleach.
- 3Anti-shrink/softening finish: mercerized wool can skip milling and go directly to softening finish; add cationic softener or mercerizing after-treatment agent to enhance silk-like smoothness and luster, and improve anti-felting stability.
- 4Dewatering and setting: low-speed dewatering, strictly no wringing and violent friction, pre-set the shape while wet, prevent mercerized wool from producing glazing or deformation due to friction.
- 5Drying/tumble drying: low-temperature drying or lay flat in the shade to 80% dry; avoid high-temperature sun exposure, prevent wool from yellowing, strength loss and luster dulling.
- 6Panel ironing: steam iron each garment panel once before sewing, medium temperature, with a cloth, eliminate wrinkles and stabilize dimensions.
- 7Garment ironing: after sewing, steam iron the whole garment once on a mannequin to set the shape; control steam and pressing time, prevent glazing and press marks from long pressing.
- 8Re-ironing and finishing: iron easily wrinkled parts such as neckline, placket, hem and cuffs once more, ensure flat and crisp, clean lines.
- 9Quality inspection and packaging: inspect dimensions, color difference, pilling, snagging, stains and ironing effect, bag after passing, store with moisture and insect protection.
Care Instructions
- Washing: warm water below 30℃, choose "wool/delicate" program or hand wash; use neutral wool-specific detergent, no bleaching and strong alkali.
- Drying: after washing gently press out water (never wring, never spin dry), lay flat in the shade to dry, avoid hanging and stretching deformation.
- Ironing: medium-low temperature, steam iron with a cloth, avoid direct pressing; mercerized wool should be ironed less and lightly to maintain luster.
- Storage: fold and lay flat, keep dry and ventilated, add insect repellent; avoid long-term hanging and heavy pressure.
Key Features
- ✓Mercerized — scale-free, silk-like lustre
- ✓Skin-friendly — smooth hand, low felting & pilling
- ✓30NM/2 2-ply — even, round and strong
Applications: Autumn-winter knits · sweaters · scarves · base layers


