返回产品中心 / 45%羊毛 32%尼龙 15%腈纶 8%羊绒
H · 纱线系列
45%羊毛 32%尼龙 15%腈纶 8%羊绒
以羊毛与羊绒提供保暖与绒感，尼龙增强耐磨强力，腈纶带来蓬松度与色彩饱和度。粗纺工艺，纱身蓬松、绒面丰满、手感厚实；16NM/1 中支纱成型稳定、织造顺畅。
PDF本产品以 PDF 规格书形式提供，点击下载查看完整规格。
⬇ 下载规格书 PDF45%羊毛32%尼龙15%腈纶8%羊绒
正乾 成分 规格 16NM/1 暖而不重，色系齐全 4 5 % 羊毛 · 3 2 % 尼龙 · 1 5 % 腈纶 · 8 % 羊绒 · 1 6 N M / 1 · 共 4 8 色
色卡实拍
工艺 · 后处理
产品亮点
- 成分：45% 羊毛 + 32% 尼龙 + 15% 腈纶 + 8% 羊绒，四纤混纺，性能互补。
- 规格：16NM/1 中支粗纺，纱身蓬松、绒面丰满、手感厚实、保暖性好。
- 手感：粗纺工艺赋予丰满绒面，羊毛与羊绒带来柔软触感，腈纶增加蓬松度，厚实而不扎身。
- 强力：32% 尼龙显著提升耐磨与抗拉强力，成衣耐穿、不易起球破洞。
- 色牢度：环保活性染色，腈纶组分上色饱满，色泽鲜亮、批次稳定。
推荐横机针型
- 主推：12针（12G）—— 与 16NM/1 中支纱匹配度最好，布面厚实平整、成型挺括。
- 轻薄/细针：14针（14G）—— 密度较紧，适合中等厚度的常规毛衫与开衫。
- 厚款/宽松：9针（9G）—— 织物蓬松保暖，可双股进纱做外套与厚款。
- 提示：粗纺纱蓬松、绒面丰满，织造密度宜适中，过密会使手感变硬；含尼龙与腈纶强力好，张力可比纯毛纱略大。建议先织小样确认密度与缩率。
成衣洗水整烫
- 1分检配缸：按款号、色号、缸差分检，同批同缸洗水，避免串色与色差。
- 2清水退浆去污：35℃以下温水 + 中性洗涤剂，轻柔去浮毛、油污与浆料；切忌碱性。
- 3缩绒/起毛整理：粗纺纱可按需轻度缩绒或起毛，使绒面丰满、手感厚实；随后加入亲水性柔软剂与抗起球整理，发挥尼龙与 腈纶的耐磨优势。
- 4脱水定型：低速脱水，严禁拧绞，趁湿预整版型，防止成衣变形。
- 5烘干/阴干：低温烘干或平铺阴干至八成；腈纶组分忌高温，避免变硬、变色。
- 6生片整烫：缝合前对各衣片蒸汽整烫一次，消除卷边褶皱；蒸汽压力宜中低。
- 7成衣整烫：缝制完成后整件上人台蒸汽烫定型一次，避免长时间直接压烫。
- 8复烫精整：领口、门襟、下摆、袖口等易皱部位尽量再多烫一次，确保平整度。
- 9质检包装：检验尺寸、色差、起球、污渍与整烫效果，合格后入袋，建议加防蛀处理。
成衣护理建议
- 洗涤：35℃以下温水，选择"羊毛/轻柔"程序；使用中性洗涤剂，避免含漂白成分。
- 晾干：洗后轻压去水（切勿拧绞），平铺阴干，避免悬挂暴晒与高温烘干。
- 熨烫：如需熨烫，使用低温蒸汽熨斗并垫布，避免高温直接接触（腈纶怕热）。
产品特性
- ✓羊绒加持 · 8% 羊绒提升绒感，保暖亲肤软糯
- ✓耐磨耐穿 · 32% 尼龙增强强力，耐磨不易破洞
- ✓48 色齐全 · 柔粉冷调与米杏蓝绿两大色系
适用场景： 秋冬毛衫 · 呢料外套 · 围巾帽子 · 童装
Back to Products / 45% Wool / 32% Nylon / 15% Acrylic / 8% Cashmere
H · Yarn Programme
45% Wool / 32% Nylon / 15% Acrylic / 8% Cashmere
Wool and cashmere provide warmth and a soft, fuzzy hand; nylon adds durability and strength; acrylic brings loft and colour depth. Woollen-spun for a plump, full cover; 16NM/1 gives stable, smooth knitting.
PDFFull specification provided as a downloadable PDF spec sheet.
⬇ Download Spec Sheet45% wool 32% nylon 15% acrylic 8% cashmere
Zhengqian Composition Specification 16NM/1 Warm yet not heavy, full color range 45% wool · 32% nylon · 15% acrylic · 8% cashmere · 16NM/1 · 48 colors in total
Color Swatches
Craft & Finishing
Highlights
- Composition: 45% wool + 32% nylon + 15% acrylic + 8% cashmere, four-fiber blend, complementary performance.
- Specification: 16NM/1 medium-count woolen, the yarn body is fluffy, the nap is full, the hand feel is thick, and the warmth retention is good.
- Hand feel: the woolen process gives a full nap, wool and cashmere bring a soft touch, acrylic increases the bulk, thick yet not scratchy.
- Strength: 32% nylon significantly improves abrasion resistance and tensile strength, the garment is durable and not easy to pill or tear.
- Color fastness: eco-friendly reactive dyeing, the acrylic component takes color fully, the shade is bright and the batch is stable.
Recommended Flat-bed Gauge
- Main recommendation: 12 gauge (12G) — best match with 16NM/1 medium-count yarn, the fabric surface is thick and flat, and the shape is crisp.
- Light/thin needle: 14 gauge (14G) — denser, suitable for regular medium-thickness sweaters and cardigans.
- Thick/loose: 9 gauge (9G) — the fabric is fluffy and warm, can be knitted with two ends for outerwear and thick styles.
- Tip: woolen yarn is fluffy with a full nap, the knitting density should be moderate; too dense will make the hand feel hard; with nylon and acrylic the strength is good, so the tension can be slightly higher than pure wool yarn. It is recommended to knit a swatch first to confirm density and shrinkage.
Washing & Finishing Steps
- 1Sorting and lot matching: sort by style number, color number, and dye lot, wash the same batch and same dye lot together to avoid color bleeding and color difference.
- 2Rinsing to remove sizing and dirt: warm water below 35℃ + neutral detergent, gently remove loose fibers, oil stains and sizing; never use alkaline agents.
- 3Milling/brushing finish: woolen yarn can be lightly milled or brushed as needed to make the nap full and the hand feel thick; then add hydrophilic softener and anti-pilling finish to leverage the abrasion resistance of nylon and acrylic.
- 4Dewatering and setting: low-speed dewatering, wringing is strictly prohibited, pre-set the shape while wet to prevent garment deformation.
- 5Tumble drying/shade drying: low-temperature tumble drying or lay flat to dry in the shade to 80%; the acrylic component is sensitive to high temperature, avoid hardening and discoloration.
- 6Panel pressing: steam-press each garment panel once before sewing to eliminate curled edges and wrinkles; steam pressure should be medium-low.
- 7Garment pressing: after sewing is completed, steam-press the whole garment once on a mannequin to set the shape, avoid prolonged direct pressing.
- 8Re-pressing and finishing: press easily wrinkled areas such as neckline, placket, hem, and cuffs once more as much as possible to ensure flatness.
- 9Quality inspection and packaging: inspect size, color difference, pilling, stains and pressing effect, bag after passing, and it is recommended to add mothproof treatment.
Care Instructions
- Washing: warm water below 35℃, select the "wool/gentle" program; use neutral detergent, avoid bleaching ingredients.
- Drying: after washing, gently press out water (never wring), lay flat to dry in the shade, avoid hanging in direct sunlight and high-temperature tumble drying.
- Ironing: if ironing is needed, use a low-temperature steam iron with a pressing cloth, avoid direct contact with high temperature (acrylic is sensitive to heat).
Key Features
- ✓Cashmere-boosted — 8% cashmere adds warmth and a soft hand
- ✓Durable — 32% nylon boosts strength and abrasion resistance
- ✓48 colours — soft pinks/cool tones and beige-apricot/blue-green
Applications： Autumn-winter sweaters · woollen outerwear · accessories · kids